Hospital Furniture

The mattress is of CRCA sheet uniformly perforated with heavy folding at ends. 32 mm dia ERW pipe head and foot bows with rubber/nylon feet.
Pretreated and powder coated.

The mattress is of CRCA sheet uniformly perforated supported on rectangle tubular framework. 32 mm dia ERW pipe head and foot bows with rubber/nylon feet.
Also available with S.S. bows and laminated panels. Pretreated and powder coated.

The mattress is of CRCA sheet uniformly perforated with heavy folding at ends. 32 mm dia ERW pipe head and foot bows with rubber/nylon feet.
Pretreated and powder coated.

The mattress is of CRCA sheet uniformly perforated with heavy folding at ends. 32 mm dia ERW pipe head and foot bows with rubber/nylon feet. Drop side rails are provided on both sides.
Pretreated and powder coated.

The mattress is of CRCA sheet uniformly perforated supported on rectangle tubular framework with two sections. The back rest is adjustable to desired level by screw/ratchet mechanism.
Also available in conventional bows. Pretreated and powder coated.

The mattress is of CRCA sheet uniformly perforated supported on rectangle tubular framework with four sections. The back and knee rest is adjustable to desired level by two seperate screw mechanisms. The entire structure is mounted on 125 mm dia castor wheels - two with brake.
Pretreated and powder coated.

The mattress is of CRCA sheet uniformly perforated in four sections fitted to main frame on elevated deck which permits trendelenburg, reverse trendelenburg low position. The entire structure is mounted on 125 mm dia castor wheels - two with brake.
Pretreated and powder coated.

The mattress is uniformly perforated in four sections for back rest, knee rest, trendelenburg, reverse trendelenburg and height adjustment. Detachable A.B.S. bows, I.V. stand and S.S. collapsible side railings. The entire structure is mounted on 125 mm dia castor wheels - two with brake.
Pretreated and powder coated.

The mattress is uniformly perforated in four sections with three screws for back rest, knee rest, trendelenburg, reverse trendelenburg.
Tilt available by movement of the whole upper structure.
Detachable A.B.S. bows, I.V. stand and S.S. collapsible/A.B.S. swinging side railings. The entire structure is mounted on 125 mm dia castor wheels - two with brake. Pretreated and powder coated.

Labour Table with C.R. Tubular Frame work for top and legs with S.S. three sections top - adjustable backrest by ratchet mechanism - middle section with U cut - leg end section can slide completely under main frame - Screw mechanism operated trendelenburg position, S.S. Head and Slide railing, S.S. Hand grips, S.S. lithonomy rods and S.S. Bowl. Pretreated and powder coated.

The mattress uniformly perforated in four sections, the back and knee rest adjustable to desired level by ratchet mechanism with S.S. handle on both side and provided with swinging type stainless steel railings and cylinder carrier.
the height is adjustable between 24" and 38" by screw mechanism. The entire structure is mounted on 125 mm dia castor wheels - two with brake. Pretreated and powder coated.

Transfer Trolley with two understructure and one stretcher, heavy tubular frame mounted on 200 mm dia castors with interlocking arrangement for understructure provided with I.V. rod, gas cylinder carrier.
Pretreated and powder coated.

32 mm dia ERW tubular supports and CRCA sheet Table Top in two sections. Head flap is adjustable on ratchet to convenient height.
Pretreated and powder coated.

The table is made of Angle iron framework with three drawers below the mattress. The head flap is adjustable on ratchet and the top is covered with rexine.
Pretreated and powder coated.

32 mm dia tubular frame and top, having perinal recess supllied with lithonomy rods. Fully stainless steel.

Heavy Tubular Frame mounted on 150 mm dia castor wheels. Removable stretcher with curved top. Pretreated and powder coated.

Machine pressed CRCA sheet locker fitted to ERW tubes. The top of locker is of stainless steel.
Also available in fully S.S.
Pretreated and powder coated.

Machine pressed CRCA sheet locker with all three sides closed having a drawer and cupboard mounted on 50 mm dia castor wheels.
Also available in fully S.S.
Pretreated and powder coated.

Pre-Laminated Table Top on ERW Tube-Frame mounted on 50 mm dia Castor wheels.
Pretreated and powder coated.

Saline stand on castors with stainless steel sliding rod.
Pretreated and powder coated.

The cabinet back is of CRCA sheet and three sides glass with one door. There are five glass shelves mounted on corner brackets. Pretreated with Enamel Coating.

Three section ERW Tubular frame with middle span of 1200 mm wide and side frame of 600 mm width. The frame is mounted on 50 mm dia castor wheels and is provide with hooks for fixing curtains.
Pretreated and powder coated.

Tray of size 550 X 380mm, trolley mounted on 50mm dia Castor wheels.
Fully Stainless Steel.

Heavy Tubular frame with two shelves mounted on 100mm dia Castor wheels.
Fully Stainless Steel.

Tubular framework in complete Stainless steel provided with three 100mm dia castors and canvas bag.

Tubular framework with 3mm CRCA sheet base fitted with 100mm dia rubber wheels.
Pretreated and powder coated.

Tubular frame work and three removable trays mounted on 100mm dia castor wheels.
Fully Stainless Steel.

Tubular frame work fitted with two shelves having guard rails, brackets for bowl and bucket mounted on 150mm dia castor wheels.
Fully Stainless Steel.

Tubular base and smooth machine screw arrangement for adjustment of height. The top of the stool is S.S.
Pretreated and powder coated.

ERW Tubular frame with CRCA sheet top
Pretreated and powder coated.

ERW Tubular frame work fitted with CRCA Sheet Seat and Back. Foldable foot rest and solid rubber rear wheels and 150mm dia swivel castors in the front.
Also available in fully S.S.
Pretreated and powder coated.

ERW Square Pipe Telescopic stem with handle for height adjustment from approx. 750mm to 1050mm. ERW square pipe frame work for legs mounted on 50mm dia castors.
Pretreated and powder coated.

Tubular frame work provided with three pairs of hooks to avail tilt at required position. The entire structure is mounted on 100mm dia swivel castors - two with brake.
Pretreated and powder coated.

Fabricated with rectangle tubular structure
Pretreated and powder coated.

The C.R. sheet top is uniformly perforated in four sections for back rest, knee rest, trendelenburg, reverse trendelenburg and height adjustment, detachable ABS bows, I.V. stand and full S.S. collapsible railings. The entire structure is mounted on 125mm dia castor wheels – two with brake. Pre-treated and powder coated.

The C.R. sheet top is uniformly perforated in four sections for back rest, knee rest, trendelenburg, reverse trendelenburg and height adjustment, detachable ABS bows, I.V. stand and ABS railings. The entire structure is mounted on 125mm dia castor wheels – two with brake. Pre-treated and powder coated.

The C.R. sheet top is uniformly perforated in four sections for back rest, knee rest, trendelenburg, reverse trendelenburg and height adjustment, Detachable ABS bows, I.V. stand and S.S. railings (size: 1370 x 350mm). The entire structure is mounted on 125mm dia castor wheels – two with brake. Pre-treated and powder coated.

The C.R. sheet top is uniformly perforated in four sections with two electrical motors for back rest and height adjustment, two screw mechanism for trendelenburg, reverse trendelenburg and knee rest. Detachable ABS bows, IV stand and ABS railings. The entire structure is mounted on 125mm dia castor wheels – two with brake. Pretreated and powder coated.